![]() ![]() USB GPS runs at 4800 baud, but you want serial data at 9600 baud), then this software and the USB Host board / IC is what you need. ![]() You could simply open up the device and gain access to the serial connection directly and that may well be the easiest and cheapest option.īut if you don’t want to modify the device (and void the warranty), or if you want data from the device at a different baud rate (e.g. You might think it a little strange that the chip in the device is converting serial to USB, then we are converting it back to serial again. Arduino Boards using CDC (UNO, Mega, Leonardo etc)Īs of V1.19, it now supports devices using USB CDC communication.Serial chipsets from the same manufacturers should also work. The USB SERIAL Driver has been tested to work with the following chips. This driver software is for products from FTDI, Silicon Labs (SiLabs), Prolific, WCH and for CDC devices. There are several USB chip sets made by a number of companies. You will find this type of chip on products like USB GPS receivers. Many serial devices use a USB chipset so the device can be easily plugged into a computer’s USB port. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |